The making of ‘Nuremberg Bathroom’

“Nuremberg Bathroom” is a project by Mohammadreza Mohseni, co-founder of Vivid Visual Studio. In this article, he shares how the project was made, along with some MAXScript that you may find useful in your own projects!

Nuremberg Bathroom 12 by Mohammadreza Mohseni

Read about the making of the Nuremberg Bathroom project!

Introduction

Hello to you all! I am Mohammadreza Mohseni, co-founder of newly founded Vivid Visual Studio in Iran and I am a certified architect with a Masters in Architecture. Additionally, I have over 10 years experience in architectural visualization and architectural photography, and I hope you enjoy reading this making-of article.

For this commercial project, I used Corona Renderer (which I have followed and used since Alpha 3) to learn about the changes and features in the latest version of Corona Renderer.

It was an absolute pleasure to write this article because I really enjoyed doing this project. Clients’ behavior and their interaction with artists is the axiom that can make the job pleasant, and can lead an artist to create extraordinary artwork (besides the technical and artistic capability of the artist). In this project, the client did not limit me and she was open to my recommendations about the design, colors, harmony, materials selection and lighting design in the process.
 

Modus Operandi (method of procedure)

In order to get some believable renders of a small space, there is no choice except to focus on richness in the details. As you may have heard, there is a famous quote that says “the devil is in the detail.” It is a hard and time-consuming process to create plenty of details in every aspect of the project, such as lighting, materials, and modeling. So, before we begin the walk-through, please keep in mind that adding lots of detail was my first priority.

Here we go, on to the workflow!
 

Inspiration

For this project, the client sent me a 2D-CAD file, plus some reference photos to act as inspiration. You can see the references below (the inspiration photos are from the houzz.com mobile app):

Mohammadreza Mohseni Nuremberg Bathroom Inspirations

 

Modeling

I used Subdivision Surface Modeling for the hard surfaces objects – that is, almost everything in this scene! A few models are from 3dsky.org and Evermotion.

To control the resolution of the models in each camera shot, based on how much detail I needed for that particular shot, I changed the OpenSubdiv Render Iterations parameter using values between 2 (for objects that were further away) and 4 (for objects that were seen in close up). You can see below how the Render Iterations affects the smoothness of the model:

Mohammadreza Mohseni Nuremberg Bathroom Subdivision Iterations

In order to control the Render Iterations efficiently, I wrote a simple script to quickly change this setting for all objects in the scene, or for the objects which were currently selected. You can find this script below for you to use:

Control OpenSubdiv Render Iterations Script

Run the MAXScript Listener (F11) and then copy and paste the script that I wrote, replacing X at the end of the script with the number you want for the Render Iterations parameter.

Note: be aware changing the resolution of a model will affect render times.

To run on all objects in the scene:

for i in objects where ((finditem (for m in i.modifiers collect classOf m) OpenSubdiv) != 0) do (for m in i.modifiers where (classOf m == OpenSubdiv) do (m.useRenderIterations = true; m.renderIterations = X))

And to run on only currently selected objects:

for i in getcurrentselection() where ((finditem (for m in i.modifiers collect classOf m) OpenSubdiv) != 0) do (for m in i.modifiers where (classOf m == OpenSubdiv) do (m.useRenderIterations = true; m.renderIterations = X ))

Below, you can see wireframes of several of the camera angles. I adjusted the amount of subdivision based on how much detail I needed in any given shot:

Mohammadreza Mohseni Nuremberg Bathroom Geometry from different camera angles

 

Camera & Compositions

I used the golden ratio as a guideline to compose my camera shots. You can see it below, overlaid on the renders:

Mohammadreza Mohseni Nuremberg Bathroom PIC_03, Golden Ratio

Finding the right camera settings is really easy if you have a background in photography (like me), and it will take a less than minute to set your camera exposure triangle for your lighting scenario.

Even if you don’t have experience with photography, it is not a big hassle – you can use one of my scripts called “DSLR Exposure (EV-LV Method)” to help you set your camera. The script supports the Corona Camera Modifier, as well as other camera types, and you can download it here.

 

Mohammadreza Mohseni DSLR exposure script UI

Note: if your priority is DOF, use AV mode; if your priority is Motion Blur, use TV mode.

 

Lighting

Remember the “Modus Operandi” part of this making of? Well, now we will begin focusing on the details, aiming to keep it simple but realistic. One of the ways to make your lighting realistic is by using a high resolution HDRI – it will help you create realistic, natural lighting, with detailed variation, with ease.

You can of course use other methods, such as using a Corona Sky (which is awesome) and get a pretty damn good result, but I usually go for the HDRI approach. In this project, I used the Peter Guthrie 0902 HDRI loaded into a Corona Bitmap, in conjunction with a Color Correction map to change the colors a little bit. You can see the settings below:

Mohammadreza Mohseni Nuremberg Bathroom HDRI setup

Note: be aware that using a Color Correction map will increase the render time.

Then just drop that Color Correction node into the Corona Scene Environment:

Mohammadreza Mohseni Nuremberg Bathroom lighting environment

After setting up the environmental lighting, it’s time to set up the artificial lighting. Because I went for a desaturated atmosphere but I did not want my materials to look pale (especially because the colors of the materials have a kind of gray tone in general), I decided to create a chromatic contrast in my lighting by using the complementary color of the environmental lighting, and to saturate it quite a lot to make it more attractive to my client’s eyes.

Mohammadreza Mohseni Nuremberg Bathroom interior lighting 01

Mohammadreza Mohseni Nuremberg Bathroom interior lighting 02

All the artificial lights have the same setup, just with variations in intensity. You can see their positions in the pictures above, and below you can see the light settings I used:

Mohammadreza Mohseni Nuremberg Bathroom interior lighting settings

Note: The diffuse light boxes have a frosted glass in front of them (even those below the console, or those below the edge of the tub) to help make the lights look more realistic.

For the switches and sockets lights I have used a Corona Light Material with a very basic setup:

Mohammadreza Mohseni Nuremberg Bathroom Corona Light Material for switches

 

Materials

After setting up our lighting, it is time to begin the real fun part – material creation!

Note: Do not ever use any pre-created materials or a converted material right out of the box; modify it if you want to create something awesome!

Chrome:

I have used the Complex Fresnel plugin (by Siger Studio – it’s free) to create a more realistic shader.  To use the Complex Fresnel shader, disable the Corona Fresnel by setting the Fresnel IOR to 999 in the Corona Material.

For the Glossiness I have used a composite of several maps. You can see the set up in the picture below. If you do not want heavy scratches, it is really easy to modify it, just play with the opacity of the scratch map layers in the properties of the Composite map node, and you will be able to get the result you are looking for.

Mohammadreza Mohseni Nuremberg Bathroom chrome material

 

Clear Glass:

This was really easy and simple! See the material setting in picture below:

Mohammadreza Mohseni Nuremberg Bathroom glass material

 

Frosted Glass:

This was also really easy and simple. See the material setting in picture below:

Mohammadreza Mohseni Nuremberg Bathroom frosted glass material

Using this setup will give you a realistic result, but it does come with a price – it will be slower during rendering, especially because I have used this kind of glass in front of my diffuse lights to get a more realistic result. Be aware of what you are looking for, whether it is detail, or render time – if you want detail it may sometimes have a price.

Note: if you want a tint of color on glass edges, you need to model the glass correctly and with full detail. You won’t get a nice result using a simple plane and a glass material!

 

Post Production

There was not much needed in this stage, you can see the raw renders in image below:

Mohammadreza Mohseni Nuremberg Bathroom raw renders

I did a little but of tone mapping, and adjusted the exposure by +1, or in some images by as much as +2 stops, if needed. Then I added glare and bloom using ArionFX – Corona has its own lens effects and they are awesome, but after some testing I liked the result of ArionFX for this particular set of images.

Then I introduced more contrast to the images, and added sharpness using the Unsharp Mask filter – and the final images are ready! A pretty straightforward and simple procedure. You an see the layers in Photoshop below:

Mohammadreza Mohseni Nuremberg Bathroom Photoshop layers

And you can see the post production steps in the image below:

Mohammadreza Mohseni Nuremberg Bathroom Post production steps

 

And that completes the project! Here are some of the final renders:

NurembergBathroom-01 Mohammadreza Mohseni

NurembergBathroom-08 Mohammadreza Mohseni

NurembergBathroom-03 Mohammadreza Mohseni

NurembergBathroom-09 Mohammadreza Mohseni

You can see the complete set of images over at Behance.

Thank you for reading, and I hope you found some good tips here, and that you find the scripts useful!

Mohammadreza Mohseni
Co-founder Vivid Visual Studio

 

LINKS

Instagram: https://www.instagram.com/mohseni.mr/
Email: mohamad.r.mohseni@gmail.com
Vivid Visual Studio: https://vividvisual.studio

3 thoughts on “The making of ‘Nuremberg Bathroom’

  1. Wow, WoW, and WOW. You have a big THANKS from me 🙂 Your advices help me a lot to understand few things that I miss in my work or I did not on the best way. I really appreciate that you share that knowledge. Best Regards

Leave a Reply

Your email address will not be published.