Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Feodor

Pages: [1]
General Discussion / Problems with Denoise
« on: 2019-11-16, 19:12:03 »
Denoise smoothes polished surfaces.
This is the problem I noticed in denoise. Pay attention to the refrigerator.

General Discussion / Problem IR Corona 5
« on: 2019-11-15, 13:24:25 »
Faced a problem. After some time in Corona 5, IR becomes very sensitive, it is updated even when you simply move the mouse over the viewport.
It is necessary to reboot 3ds Max.
Who else came across this?

I need help / Problem DR, Crash parsing scene
« on: 2019-10-11, 11:32:20 »
Problems with DR, on a remote computer, the scene loads but closes when the status is Parsing. The scene separately on both computers is considered error-free.

Log DR:
2019-10-11 11:54:01   DR server started
2019-10-11 11:54:01   Binded to localhost
2019-10-11 11:54:01   Binding UDP socket to local address
2019-10-11 11:54:01   Binding UDP socket to local address
2019-10-11 11:54:01   Running Corona DrServer build Oct  3 2019 on TCP/UDP ports 19666, loopback TCP/UDP19667
2019-10-11 11:54:01   Available 3dsmax versions:
2019-10-11 11:54:01   2020: C:/Program Files/Autodesk/3ds Max 2020/
2019-10-11 11:54:01   2016: C:/Program Files/Autodesk/3ds Max 2016/
2019-10-11 11:54:01   Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\Feodor\AppData\Local\CoronaRenderer\DrData\corona_dr.max"  -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5  -postRenderScript:"C:\Users\Feodor\AppData\Local\CoronaRenderer\DrData\"
2019-10-11 11:54:03   Started loopback connection with 3ds max
2019-10-11 11:54:04   Cannot contact 3ds Max, trying again ...
2019-10-11 11:54:04   Started loopback connection with 3ds max
2019-10-11 11:54:05   Cannot contact 3ds Max, trying again ...
2019-10-11 11:54:05   3dsMax started successfully
2019-10-11 11:54:06   Accepted remote connection from
2019-10-11 11:54:06   Started connection #1
2019-10-11 11:54:13   DR is finished
2019-10-11 11:54:13   Ready for new connection
2019-10-11 11:54:13   Accepted remote connection from
2019-10-11 11:54:13   Started connection #2
2019-10-11 11:54:17   Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>1</FrameName><HostVersion>Max2020</HostVersion><CameraName>CoronaCamera002</CameraName><Region>0 0 0 0</Region><ImageSize>2560 1280</ImageSize><MD5>834b5c66556f6e948d91c9c74c1b01d0</MD5><CoreVersion>5 (DailyBuild Oct  3 2019)</CoreVersion><IpAddress></IpAddress></root>
2019-10-11 11:54:17   Saving incoming scene to C:/Users/Feodor/AppData/Local/CoronaRenderer/DrData/received_scene_2314971674.max
2019-10-11 11:54:33   Downloaded scene: 175 M bytes in 15 s
2019-10-11 11:54:34   Render for connection #2 started
2019-10-11 11:54:36   Received sampling focus mask (region 0 0 2560 1280)
2019-10-11 11:55:39   Closing loopback manager
2019-10-11 11:55:40   DR is finished

General Discussion / Problem with the license.
« on: 2019-08-15, 20:51:20 »
Please understand my situation and solve the problem as soon as possible. It seems that tech support does not understand what happened. All day I can’t work and I don’t know how long this situation will last. My project could fail. That's what happened:
There was a problem with the license. My card details have changed due to which the auto payment did not go through. I went into my personal account and made a purchase using a new card, the money was withdrawn from the account, a letter with confirmation of payment was sent to the mailbox, but for some reason the payment data did not change in my personal account. As a result, the product is paid for, but I still can not use it.
Technical Support Answer:

Hi Feodor,
According to our system, the payment has failed due to the card being marked as expired. Can you please check that the ard is still valid. If you have a new card you can update your customer zone information by doing the following:
Please try the following:
1. Visit your subscription management link
2. Go to "edit subscription" > "update payment method"
3. Enter your payment information again
4. Save the changes
If this is successful, then the "update payment method to avoid cancellation" warning will disappear.
If this is not successful, then you can purchase a new subscription, and then we can cancel this one.
Please notify me once you update your payment method, and I will then check what is the status of the issue.


Firstly, in my account I did not find links to"edit subscription" > "update payment method". I wrote about this in technical support, to which I did not receive an answer.
Secondly, "Enter your payment information again...." - that is, they told me to do what I already did earlier. Payment was successful, money was debited from the card, a receipt of successful payment came
but the license was not activated. To my repeated letter about this, technical support replied:


If any money was extracted from your account and the purchase was then canceled by our system. The money will automatically be returned to your account. This process can take up to 7 workings days but in most cases, sooner. If it hasn't done so by then please contact me and I will investigate further.

But the system did not cancel the purchase, there are no reports of this anywhere. Payment was successful. But in my personal account this order is not displayed and the license is not activated. No one can solve this problem. It seems that my letters are answered by robots who do not read what I write. I can’t work and what should I do? Install a pirated version? But my projects are made with corona-5-3dsmax-daily-2019-08-07...
I really hope for an understanding and a quick solution to the problem.

General Discussion / normal map incorrect gamma
« on: 2019-07-26, 19:50:19 »
"A normal map appears to be using input image with incorrect gamma. This can cause shading artifacts.
Offending map: Map #5233989   Select object »   Learn more »"


Introduces in the strongest confusion, why can't this tick be automated?
in 100% of cases, it is always necessary to switch manually or using a corona converter.
If the gamma is not correct, allow the Corona Normal to automatically switch.
If during the automatic switching the gamma is displayed incorrectly, let the user correct it by clicking on the check mark, after the automatic action will stop working.
This error message is not needed.
As if the gamma is not defined correctly, in any case, the tick should be removed. You will be bothered by this message.

This happens when you use a large number of objects, the more of them the longer the preparing.
When using standard material, everything works fine.
Is this a known technical problem, a feature of light material? So it should be?

Bug Reporting / How to change font in Corona VFB?
« on: 2019-04-01, 20:44:25 »
Who has such a problem?
I suspect after updating Windows 10
the interface in Corona Render has changed, now in the frame buffer such a font.
This is observed on different versions of Corona, versions of 3ds max and in Cinema 4d on different computers.

Is it possible to find out solutions by returning to the standard font?

Gallery / Toy Loco
« on: 2018-12-02, 19:28:36 »
For me, this train became a kind of Bechmark 3D, on which I check the development of modern renders, I achieve the maximum result so that the render would be like a photo.

Photo -

Bug Reporting / Corona 2/3 very long render SSS materials
« on: 2018-08-10, 13:26:35 »
In the beginning I want to thank you for the wonderful render, and the work that you are doing!

I have this problem
On an example of this heavy scene a lot of SSS material. Corona 1.7 visually, the noise goes much faster, Corona 2 counts four times longer.
This scene in the format 1920x1920 when the renderer writes will be counted as 70 hours !!! Instead of 16 !!! :(

Example 640x640

Gallery / CASIO AQ-190W V2
« on: 2017-07-08, 12:03:07 »
My favorite tradition is to return to my old works and bring them to the desired level to date.
A week for setting up materials and a twelve hour render for each frame.
I tried to make it as realistic as possible, which could not be distinguished from the photo. Much has been emphasized from the work done on the adjustment of metals, and he created textures for himself.
Enjoy watching.

(Sorry my bad English google translate)

Gallery / CASIO AQ-190W
« on: 2017-06-28, 21:39:57 »
SolidWorks, 3dsmax, Corona Render 1.6

Pages: [1]