Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - TangibleVisual

Pages: [1] 2
1
General CG discussion / Matterport 3d Tours
« on: 2019-12-08, 14:27:51 »
Hi everyone,

I've been admiring these the Matterport tours, I particularly like the external cross sections views and the Google street view style navigation.

Does anyone know of any applications that are being developed/exist that go generate this kind of experience with rendered 360s?

2
I need help / Re: Bad allocation Exception!
« on: 2019-10-24, 18:39:29 »
Hi Rowan,

I took a look at the logs and I couldn't see anything that might be useful.

However I have spotted this that might have something to do with it?


3
I need help / Re: Bad allocation Exception!
« on: 2019-10-23, 07:57:03 »
Maru and Rowmanns,

So I'm working on a completely new scene and I'm still experiencing this problem or at least something very similar, I've not had any bad allocations during render, however if I set a render going with DR and manually stop it by pressing 'STOP' in the Corona VFB a few hours later I get a around 3 bad allocation errors pop up, max will freeze until eventually I try to close the VFB and it crashes out.

My workaround for the moment is that I just have to remember to save the CXR while it is still rendering, a little risky and not ideal.

This does not happen during local rendering, only while using DR.

Are there any logs I can send you to help you diagnose the issue?

Regards,

Dan


4
I need help / Re: Corona Dr server Local IP mismatch
« on: 2019-09-20, 18:39:13 »
Update, so I have a work around. The PC I am on has 2 network adaptors, I switched the cable and set the static IP on the new adaptor and now it works as expected. 

5
I need help / Re: Corona Dr server Local IP mismatch
« on: 2019-09-19, 13:39:00 »
Hi Rowan,

No, no virtual adaptors. I've done a little testing and when I set the network adapter to 'obtain IP address automatically' it is given 192.168.1.55 by the DHCP server, then when I set it back to the static IP 192.168.1.100 (which is outside of the DHCP allocation pool) the DR server doesn't seem to recognise this change..

I've always run static IPs on the workstation and slaves and never had this before..

Dan

6
I need help / Re: Corona Dr server Local IP mismatch
« on: 2019-09-18, 12:26:58 »
Hi Frood,

Just as expected, 192.168.1.100  it's odd, I don't know where CoronaDR is getting 192.168.1.55 from.

Dan

7
I need help / Corona Dr server Local IP mismatch
« on: 2019-09-18, 07:44:27 »
Hi,

I have an odd problem, I noticed that my machine wasn't picking up a DR job. I noticed that the Local IP address show on DRServer 192.168.1.55 does not match the local IP of the machine 192.168.1.100 (which is set as a static IP by the way)

See attached.

I've tried to fix this by reinstalling DR server but to no avail, is there anything else I should do?

Thanks,

Dan

8
I need help / Re: Bad allocation Exception!
« on: 2019-08-09, 13:36:11 »
Hi Maru,

Thanks for taking a look.

I already updated everything to latest before I came around to posting. RAM speed is showing 1064.1Mhz on CPU-Z 8 slots matched set DDR4 Corsair CMK64GX4M8A2400C14, Mainboard Gigabyte Aorus X399 Xtreme-CF, Latest BIOS (F5i), not overclocked.

I will try your other suggestions, but it may be a few weeks before I can come back to this.

Cheers

Dan

9
I need help / Re: Bad allocation Exception!
« on: 2019-08-08, 17:39:20 »
Hi Rowan,

But what I don't get, if I am running out of memory, is why I'm showing RAM usage of around 40GB (24GB free) in task manager when I am getting these errors.

The CXRs are large, around 7GB for a 6K render is there a limit to how large / how many passes can be stored in them?

Dan

10
I need help / Re: Bad allocation Exception!
« on: 2019-08-08, 16:39:47 »
Hi Rowan,

No, what I mean is the render will do something part way through the process where the CXR will become unreadable.

Steps are:

Press Render

Sometime later maybe an 2 hours or more 2-3 'bad allocation' errors will pop up, The render will continue, I have learned that I can save out Exr's from each channel separately and open them fine, but if I try to save and open a CXR then it will fail to do so.. giving the same error message as in the screen shot on the OP.

Also.. attempting to stop the render after an bad allocation error messages will cause Max to crash.

11
I need help / Re: Bad allocation Exception!
« on: 2019-08-08, 16:25:49 »
Hi Rowan,

I won't have chance to for a while, I've moved to another project and very stacked here at the moment.  All I'd say is it sometimes takes a few hours, e.g. The first few corona auto saves I could open and later ones I could not. Also maybe of interest I'm using an AMD 2990WX processor with 64GB RAM.

Dan

12
I need help / Re: Bad allocation Exception!
« on: 2019-08-08, 15:10:46 »
Hi Rowan,

Have you found anything?

Dan

13
I need help / Re: Bad allocation Exception!
« on: 2019-08-06, 15:02:50 »


I followed the link to a dropbox uploader. I provided a link to this thread on as requested, the file name is "For support.zip" it's 677MB

14
I need help / Re: Bad allocation Exception!
« on: 2019-08-06, 13:59:30 »
Hi Rowan,

I have archived and uploaded the file, I am using Corona 4 hotfix 1.

Thanks,

Dan

15
I need help / Bad allocation Exception!
« on: 2019-08-05, 16:35:35 »
Hi,

The scene I am working on is regularly crashing, I thought at first this was due to the displacement in the scene but I have turned it off and I as still getting it. It is quite a detailed scene but it should fit in memory fine, it seems like there is a memory leak or something? Please see attached screenshot.

Windows 10 1809, Max 2020 with latest patches, latest version 6.2.2 of Itoo forest object was in the scene but has been deleted so just the 0 sized object warnings you can see, latest Corona, nothing else special to report.

Any ideas anyone?

Cheers

Pages: [1] 2