Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Feodor

Pages: [1] 2 3
1
News / Re: Sad News
« on: 2019-12-05, 09:32:36 »
Very terrible and sad news, my condolences to his family and colleagues.

2
General Discussion / Re: Problem IR Corona 5
« on: 2019-11-19, 13:58:22 »

Yes both IR in VFB and docked on view-port, I did production too and IR back again to no avail, except my error messages of missing plugins and the xref object everything looked great. I know it's a nuclear option but do try and move the entire scene into a fresh empty 3ds max, you will have to setup somethings again but it might also help alot.

When working with arch-viz and importing stuff from 3rd party sources be sure to have cleaner script that removes bad track-nodes, Clean Motion Clips, Layer Controls and Retimer Managers. They can greatly impact performance and stability of your saved project.

(silly note, on yourbedside table where the pictureframe is, it's inside the furniture ^^)

Script Cleaner in my Max it is made with a special button, all the objects I have are subject to mandatory cleaning.

Thanks))) Corrected

3
General Discussion / Re: Problem IR Corona 5
« on: 2019-11-19, 13:44:32 »
Hi. I think the culprit is that OP had two instances of Max open at the same time. That's something that can cause problems - specifically in some 3dsMax versions. If this is it, then it's a Max problem, and not a Corona problem.

Regards

It may well be! Since I have two Max. But this problem was noticed only by Corona 5

4
General Discussion / Re: Problem IR Corona 5
« on: 2019-11-18, 17:04:51 »
Have you tried to render, calculate one view, then use IR?
I suppose the matter is in the scene, or in the crooked material, the object, plus the plug-in, since on the basis of the first scene I make the second option, while this problem does not exist. And I have great suspicions, but the Phoenix FD effect. Since in the second embodiment one of its objects instead of 4
I often use Xref in projects, this was not, I doubt it.

Well, I understand, while everything is very vague in reducing the problem, if it appears again and it becomes clear exactly what exactly, I will write.

5
General Discussion / Re: Problem IR Corona 5
« on: 2019-11-18, 10:16:59 »
Sent you a scene.

6
General Discussion / Re: Problems with Denoise
« on: 2019-11-18, 10:15:38 »
Thanks Romullus, I already do that.)))

7
General Discussion / Re: Problems with Denoise
« on: 2019-11-18, 08:55:47 »
Now included Denoise from Intel.
On Friday I sent you this scene on another problem, 1k-apartament007.rar is called, it has this room and all the settings are there.

8
General Discussion / Re: Problems with Denoise
« on: 2019-11-17, 11:04:47 »
Hello! Thanks for the answer.
Yes, I know how to deal with this; no one canceled Photoshop. I just thought that denoise should not smear the texture. :(

9
General Discussion / Problems with Denoise
« on: 2019-11-16, 19:12:03 »
Denoise smoothes polished surfaces.
This is the problem I noticed in denoise. Pay attention to the refrigerator.




10
General Discussion / Re: Problem IR Corona 5
« on: 2019-11-15, 16:05:30 »
One more clarification. Found this problem appears after working time 3ds max.
I have two versions of 3d max open. In one, I modeled an object; in the second, I assemble the scene and render. While I modeled in the first, in the second this problem appeared by itself. Although I inserted only a new object there and that's it.

11
General Discussion / Re: Problem IR Corona 5
« on: 2019-11-15, 15:05:04 »
With the release of version 5, I am working with only one project so far, the project is a heavy max file weighing more than 500mb. There is currently a Phoenix effect in the scene. I use a lot of scripts, as always.
I noticed this happens after a long test render, at first everything is fine. I start the render, it takes one hour. I stop the rendering, turn on the IR, and such a problem begins.

12
General Discussion / Problem IR Corona 5
« on: 2019-11-15, 13:24:25 »
Hello!
Faced a problem. After some time in Corona 5, IR becomes very sensitive, it is updated even when you simply move the mouse over the viewport.
It is necessary to reboot 3ds Max.
Who else came across this?

13
I need help / Re: Problem DR, Crash parsing scene
« on: 2019-10-12, 16:03:57 »
Hi,

There is a strange issue where this can occur with scenes which have locked cameras/views in the render setup dialog.

If you have a locked camera can you try to unlock it, select the camera/view you'd like to render and then relock it and save.

Let me know if this works for you.

Rowan

If I understand you correctly, this is not the case, the cameras are all unlock
:(

14
I need help / Problem DR, Crash parsing scene
« on: 2019-10-11, 11:32:20 »
HI!
Problems with DR, on a remote computer, the scene loads but closes when the status is Parsing. The scene separately on both computers is considered error-free.


Log DR:
2019-10-11 11:54:01   DR server started
2019-10-11 11:54:01   Binded to localhost
2019-10-11 11:54:01   Binding UDP socket to local address 192.168.137.1
2019-10-11 11:54:01   Binding UDP socket to local address 192.168.1.64
2019-10-11 11:54:01   Running Corona DrServer build Oct  3 2019 on TCP/UDP ports 19666, loopback TCP/UDP19667
2019-10-11 11:54:01   Available 3dsmax versions:
2019-10-11 11:54:01   2020: C:/Program Files/Autodesk/3ds Max 2020/
2019-10-11 11:54:01   2016: C:/Program Files/Autodesk/3ds Max 2016/
2019-10-11 11:54:01   Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\Feodor\AppData\Local\CoronaRenderer\DrData\corona_dr.max"  -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5  -postRenderScript:"C:\Users\Feodor\AppData\Local\CoronaRenderer\DrData\post.ms"
2019-10-11 11:54:03   Started loopback connection with 3ds max
2019-10-11 11:54:04   Cannot contact 3ds Max, trying again ...
2019-10-11 11:54:04   Started loopback connection with 3ds max
2019-10-11 11:54:05   Cannot contact 3ds Max, trying again ...
2019-10-11 11:54:05   3dsMax started successfully
2019-10-11 11:54:06   Accepted remote connection from 192.168.1.66
2019-10-11 11:54:06   Started connection #1
2019-10-11 11:54:13   DR is finished
2019-10-11 11:54:13   Ready for new connection
2019-10-11 11:54:13   Accepted remote connection from 192.168.1.66
2019-10-11 11:54:13   Started connection #2
2019-10-11 11:54:17   Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>1</FrameName><HostVersion>Max2020</HostVersion><CameraName>CoronaCamera002</CameraName><Region>0 0 0 0</Region><ImageSize>2560 1280</ImageSize><MD5>834b5c66556f6e948d91c9c74c1b01d0</MD5><CoreVersion>5 (DailyBuild Oct  3 2019)</CoreVersion><IpAddress>192.168.137.2</IpAddress></root>
2019-10-11 11:54:17   Saving incoming scene to C:/Users/Feodor/AppData/Local/CoronaRenderer/DrData/received_scene_2314971674.max
2019-10-11 11:54:33   Downloaded scene: 175 M bytes in 15 s
2019-10-11 11:54:34   Render for connection #2 started
2019-10-11 11:54:36   Received sampling focus mask (region 0 0 2560 1280)
2019-10-11 11:55:39   Closing loopback manager
2019-10-11 11:55:40   DR is finished

15
General Discussion / Re: Problem with the license.
« on: 2019-08-16, 07:00:32 »
Only support can assist you as only they have access to the licensing system. Do please reply to their response to you and ensure your ticket stays open and you pass along all the most recent information - nobody on the forum can assist, sorry.

I wrote here because the tech support was incompetent. She did not explain and did not help. Am I able when I do not know whether to wait for help or not, to wait for a refund, or not? Communication with a specialist as with Alpha Centauri, a very long time to wait for an answer. And from their answers only questions and a feeling of uncertainty arise.

Pages: [1] 2 3