Author Topic: UVW-Randomnizer not working with displacement  (Read 3638 times)

2019-07-28, 19:09:02

PROH

  • Active Users
  • **
  • Posts: 1107
    • View Profile
Hi. As the title says, the UVW-Randomnizer doesn't work in the displacement-slot. It works in the bump-slot, but not in the displacement-slot.

Don't know if this a known issue, but since I couldn't find any reports on this, I wanted to let you know.

Best Regards

2019-07-28, 20:40:23
Reply #1

romullus

  • Global Moderator
  • Active Users
  • ****
  • Posts: 6582
  • Let's move this topic, shall we?
    • View Profile
    • My Models
Indeed, and it gets even worse if autobump is enabled - displacement is not affected by uvw randomizer, but automatic bump mapping, is. That gives nasty artifacts and it gets very messy if you tick/untick autobump when IR is running.
I'm not Corona Team member. Everything i say, is my personal opinion only.
My Models | My Videos | My Pictures

2019-07-29, 14:29:42
Reply #2

maru

  • Corona Team
  • Active Users
  • ****
  • Posts: 9978
  • Marcin
    • View Profile
We have a similar report about Multimap in "by element" mode. Will be sure to log this one too.

(similar to: internal id=297184042)

2019-08-06, 10:44:04
Reply #3

maru

  • Corona Team
  • Active Users
  • ****
  • Posts: 9978
  • Marcin
    • View Profile
Hmm, I tried reproducing this and failed. Can you try with the newest daily (29.07.2019) and let me know what specific options of the UVW Randomizer you used?
A super simple scene would be probably best.
Thanks in advance!

2019-10-15, 11:57:43
Reply #4

blackzorn

  • Active Users
  • **
  • Posts: 6
    • View Profile
hello, i was just going to write about this uvrandomiser and displacement problem as well so I can tell you:
i m using corona 4 hotfix1,
as you can see on this pic i attached,
corona multimap is working perfectly with "mesh element" mode,
but the "uv randomiser" in "mesh element" mode does not work on the displacement map
it is working on the full object, but not on different mesh elements of the object.

2019-10-15, 15:01:42
Reply #5

rowmanns

  • Corona Team
  • Active Users
  • ****
  • Posts: 759
    • View Profile
hello, i was just going to write about this uvrandomiser and displacement problem as well so I can tell you:
i m using corona 4 hotfix1,
as you can see on this pic i attached,
corona multimap is working perfectly with "mesh element" mode,
but the "uv randomiser" in "mesh element" mode does not work on the displacement map
it is working on the full object, but not on different mesh elements of the object.

Hi,

Would you be able to send us your scene please?

Instructions on how to do this are in my signiture.

Thanks,

Rowan
Please read this before reporting bugs:
How to report issues to us!

2019-10-15, 15:15:52
Reply #6

blackzorn

  • Active Users
  • **
  • Posts: 6
    • View Profile
i uploaded the scene
1571145291_z-issue.zip

2019-10-15, 15:45:22
Reply #7

rowmanns

  • Corona Team
  • Active Users
  • ****
  • Posts: 759
    • View Profile
Thanks for the scene,

I have confirmed the issue. I will forward it to our dev team.

(Internal ID=410159793)
Please read this before reporting bugs:
How to report issues to us!

2020-05-20, 00:29:01
Reply #8

cjwidd

  • Active Users
  • **
  • Posts: 615
    • View Profile
    • Artstation
This issue persists in Corona version 6 (DailyBuild Apr 28 2020)

« Last Edit: 2020-05-20, 02:26:23 by cjwidd »