We are pleased to announce that Corona Renderer for ARCHICAD Alpha 2 is released!
We’ve been developing this version of Corona Renderer for a while; Alpha 1 was just for internal testing, but Alpha 2 is now ready for you to test!
Since this is an Alpha version, it is far from feature complete, and there are very likely some bugs in the software, so please keep that in mind (especially if considering using it for any commercial projects! You are welcome to do so, but be aware that there may be crashes, instability, missing features, etc.)
We need your testing and feedback to make Corona Renderer for ARCHICAD into everything you want it to be, and we appreciate any testing that you can do for us!
The plugin is already quite advanced and supports:
- Interactive Rendering takes the guesswork out of setting up materials, lighting and scene composition, and removes the need for test renders.
- The Corona VFB offers a wide range of post-processing effects without needing to use external software, with tone mapping, bloom and glare, vignetting, and more.
- Denoising, which can reduce render times by up to 70%.
- Corona Materials and Textures with a custom texture editor.
- Support for native ARCHICAD geometry, lights, and materials.
Note: The current Alpha is for ARCHICAD for Windows; in the future, we may develop a version for macOS (if you know any macOS developers, point ’em to our jobs page!)
HOW TO GET STARTED
If you want a quick introduction to getting started with Corona Renderer for ARCHICAD, we’ve created a tutorial for you to walk you through everything you’ll need to get up and running:
DOWNLOAD
If you want to get straight to the download, you will find the latest version at:
STATUS AND DOWNLOADS THREAD
Read about the first public release of Corona Renderer for ARCHICAD!
ALPHA 2 QUICK FACTS
Here’s what you can expect in the first publicly usable version:
- Interactive Rendering is supported
- The Corona VFB has been implemented (with the same post-processing options as you may be familiar with from Corona Renderer for 3ds Max and Cinema 4D)
- Corona Materials and Textures have been implemented, with a custom texture editor
- All geometry from ARCHICAD is supported
- Good support for native ARCHICAD lights
- Corona Sun and Sky from the ARCHICAD sun
- The basic ARCHICAD material is supported
- Render Elements are supported
- Corona proxy is now supported
WHAT IS CORONA RENDERER ANYWAY?
If you’ve not heard of Corona Renderer before, here’s the quick guide to what it is. Corona Renderer is a high-performance (un)biased photorealistic renderer, which focuses on being:
- Easy to Use
We put as much focus into making the software intuitive – with great results out of the box without having to change the defaults – as we do into the performance of the software itself. You can stay focused on being an artist or architect, and not have to become a technician manipulating scores of obscure parameters; we make it as close to “just press render” as it’s possible to get! - Powerful
Corona Renderer keeps everything physically plausible, from materials to lights, which means it gives natural, realistic lighting, delivered with great rendering performance. - Affordable
If you are wondering about jumping aboard now and growing to love the engine (as almost everyone who tries it does!), we can assure you that keeping things affordable is one of our main aims for Corona Renderer – so when the commercial version comes out, it won’t break the bank whether you are a hobby user, a small company, or a large firm with 10s or 100s of artists.
WHAT’S IN THE FIRST RELEASE
If you’ve used, seen or read about Corona Renderer for 3ds Max and Cinema 4D, these features will be familiar to you – however, if you’ve never heard of Corona Renderer before, below we give you a comprehensive introduction to how it will revolutionize your workflow!
Interactive Rendering
Interactive Rendering (IR) is a game-changer for your workflow, making sure that we make YOU faster as well as your renders (after all, your time is much more important than your machine’s!)
IR lets you see how everything will look in your final render, but with near real-time feedback, removing the need for repeated test renders. This means:
- You no longer have to work on your materials just in some artificial preview window, but can see how they will look on the final model under the lighting conditions in the scene.
- You can adjust your lighting to find just the look you want for the scene.
- You can find the perfect camera angle to frame your shot.
- You can move your objects around to get the perfect composition.
Denoising
Corona Renderer is a progressive renderer, which means it starts with a noisy version of the image which then cleans up with every pass of the rendering. Denoising is a feature that lets you stop rendering earlier and remove any remaining noise in a quick postprocessing step. You can see how it works in the image below, rendered for only 4 passes:
It’s simple to use, does a great job of preserving detail while removing noise, and as a result you can often save up to 50% to 70% off of your render time!
The Corona VFB
The Corona VFB brings together many aspects of Corona Renderer into one convenient window.
You use it for:
- Viewing Interactive Rendering and final renders,
- Adjusting all post-processing options before, during or after rendering (including during Interactive Rendering), such as all tone mapping, bloom and glare, applying a LUT, etc.,
- Saving and loading post-processing settings,
- Adjusting LightMix, and saving and loading LightMix variations,
- Viewing render elements,
- Setting the right denoising blend,
- Saving your renders (both final, and results from Interactive Rendering).
Post Processing
Corona Renderer aims to reduce or even remove the need to open up some external image editor after rendering, and lets you adjust and tweak the image right in the VFB.
Even as you are rendering, you can:
- Adjust Exposure, White Balance, Color Tint, Highlight Compression, Contrast, Saturation, Filmic Shadows/Highlights, etc.,
- Add Vignetting,
- Add Bloom and Glare,
- Apply a LUT,
- Create, adjust and save / load custom Curves.
Corona Materials and Textures
The Corona Material is a one-stop material that lets you create anything from stone to metal to glass to wood… whatever your project needs! We even have our own custom Material and Texture editors, including a range of objects you can use in the preview, plus you can rotate the preview to check how the material looks from any angle.
Corona Lights
Already in Alpha 2, we have the Corona Sun (based on sunlight in ARCHICAD and fully configurable), and partial implementation of the Corona Light (at present, IES and other advanced features have not been implemented).
The default sky can also be disabled, or overridden with a texture so that you can use HDRI images to light your scene. Common methods for mapping textures to the environment are implemented.
Support For Native Geometry, Lights and Materials
All ARCHICAD geometry is supported, so will render as expected without having to make any adjustments, changes or concessions. Alpha 2 also has excellent support for native ARCHICAD lights, including non-physical “fakes” such as semi-transparent or missing shadows, no falloff, etc.
The Corona Image Editor
You can think of the Corona Image Editor (CIE) as a standalone version of the Corona VFB – save any render to the .CXR format (Corona EXR), and you can adjust that image at any time without having to re-render or open ARCHICAD.
This includes all the post-processing settings, using LightMix, and adjusting denoising. You can also load and save post-processing settings and LightMix settings to exchange them freely in either direction between the CIE and the VFB in ARCHICAD.
Render Elements
Sometimes you need full control of a render in post-production, which is where Render Elements come in. They let you create special separate passes so that you can adjust various components in your image (such as tweaking reflection brightness, or the strength of bounced light), and you can use them to apply special processing too (such as masking out individual objects, adding depth of field or fog, etc.)
ARCHICAD does not natively support render elements, but Corona Renderer has a comprehensive range of them – in fact, Corona Renderer for ARCHICAD supports the same list of render elements as any other version:
The full list of Render Elements is below:
- Basic/Direct
- Basic/Emission
- Basic/Indirect
- Basic/Reflect
- Basic/Refract
- Basic/Translucency
- Basic/Volumetrics
- Geometry/Normals dot product
- Geometry/Normals shading
- Geometry/Normals geometry
- Geometry/Primitive coords
- Geometry/Uvw coords
- Geometry/World coords
- Geometry/Z depth
- Mask/ID
- Shading/Albedo
- Shading/Alpha
- Shading/Beauty
- Shading/Bloom and glare
- Shading/Components
- Shading/LightMix
- Shading/LightSelect
- Shading/Raw component
- Shading/Shadows
- Shading/Source color
- Texture
Smaller features
- Monochrome model effect – lets you override materials in the scene with a simple “clay” material, preserving properties of some materials such as opacity, reflections, refractions etc. as necessary:
- Robust bump mapping and displacement.
- ARCHICAD’s Sun Studies and Fly-throughs are supported; motion blur is supported in Fly-throughs.
- Help is available in-program, thanks to descriptive pop-up tooltips.
- You can choose to only render the Render Elements, greatly speeding up render time by removing the Beauty pass (ideal for those times you discover you need a particular Render Element that you didn’t create when you first rendered the scene!)
GIVE US YOUR FEEDBACK!
If (or at this point in development, more likely “when”!) you find a bug, or if you want to request a certain feature, or UI layout, or anything else, please visit the Corona Render for ARCHICAD boards on the forum.
When reporting a bug, please tell us:
- Which version of ARCHICAD you are using
- Which version of Corona you were using
- The steps to reproduce the bug (or, what steps you were doing at the time the bug occurred)
- Renders, screen grabs, or even videos that illustrate the bug (this can be useful for feature requests too, e.g. to show results from other render engines that you are trying to reproduce)
- If possible sending the scene itself is always very helpful
DOWNLOAD
Now that you are excited after reading everything that is already implemented even at this early stage, here’s that download link again!
STATUS AND DOWNLOADS THREAD
WHAT’S NEXT
Just so you are familiar with the naming conventions, the next step will be work on daily builds for Corona Renderer for ARCHICAD Alpha 3. Once we have that stable and all the planned features for this next step are in place, there will be a final version of Corona Renderer for ARCHICAD Alpha 3.
We’ll keep with Alphas, as many as we feel we need, until everything is nearing feature complete, and then move to Betas.
As to which features we’ll implement next, a large part of that is up to you! Give us your feedback on what you most want to see implemented. Our current plans are to implement good proxies, import external 3D assets, and rework the Material and Texture Editor (probably using a nodal editor) – other than that though, we are looking to hear your suggestions!
We’re very excited to be bringing Corona Renderer to a whole group of new users, and providing them with THE best rendering option for ARCHICAD! We’d like to thank you for signing up and providing us with your valuable time for testing and feedback – you’re helping shape the future of Corona Renderer!
THANKS!
Jan Spacek, Tom Grimes, Jarda Křivánek and the Corona Team!
So excited to see corona for archicad. Thank you guys!
You are welcome! And we’re excited to get this out into the hands of the public for everyone to start using and testing! Thanks! Tom
Wao Thanks for this amazing job!
You are welcome! We’re pleased to give a whole new group of users access to Corona’s ease of use and power! Thanks! Tom
I’m looking forward to this, it will be a big hit and a game-changing & especially for interior design!
buena la noticia gracias..
Finally…such a good news. Thank you. I’ve done an online course to learn Corona for 3dsMax, and I loved it. I’ve been waiting to be able to use it in Archicad for a long time.
Thanks Chris! Glad this is good news and you can start using Corona inside ARCHICAD 🙂 Cheers! Tom
how to install ? or just its for english version…
Should just run the installer, no other actions necessary. If you have any problems with installation, please report in the bugs section of the forums (https://corona-renderer.com/forum/index.php?board=47) with as much detail as possible – what operating system, what version of ARCHICAD, was there an error message from the installer and if so what was it, did the installer run without problems but then you can’t find Corona inside ARCHICAD, and so on. Thanks!
I don’t see how to use the corona proxy
Please post over on the forums, where support and developers will be able to see and reply to your question 🙂 Thanks! Tom https://corona-renderer.com/forum/index.php?board=43.0
Thank you for this, time to start playing with Corona!!!
You are welcome! Enjoy, and we look forward to your requests and feedback! Thanks, Tom
i cant install it please help it wont show up
Sorry you are having problems – please post over on the forum, where support and developers will be able to see and reply to the issue. https://corona-renderer.com/forum/index.php?board=47.0 – thanks! Tom
Ноw i can rotate HDRi in bitmap map?
Please post over on the forum, where support and developers will be able to reply to your question. https://corona-renderer.com/forum/index.php?board=43.0 – thanks! Tom
nice well done….
Thanks Ebo! Tom
Big Thanks for this. So this is a alpha version which is completely free to test with Archicad? Does it have any limitations in quality?
Hi Meda! There are no limitations (other than it is an Alpha and so is not feature-complete, meaning there may be things it doesn’t do yet that are planned to work in the final release). And yes, free to use, even for commercial projects, while in development. Thanks! Tom
very nice, I just love it, I would like to have in a future a fiber/fur/hair plugin for corona/archicad, to be able to render gras, carpets, etc
Thanks Gonz! Be sure to log all feature requests over on our forums, so our developers will see them 🙂 https://corona-renderer.com/forum/index.php?board=45.0 is the place for that, and we appreciate you taking the time to tell us what you would like to see from Corona! Tom
Install and try Corona A2 with Archicad 22.
Made very simple scene.
Corona freeze very quickly, VPR window is not responsive (STOP button stopped to work) etc.
Closing Corona is not solution, jam remain. Must restart Archicad.
This is my first experience. But the software promises a lot and I can’t wait for further steps.
Riko
Please be sure to report all bugs over on the forum (https://corona-renderer.com/forum/index.php?board=47.0) – that way our developers can see it and be able to fix it 🙂 Thanks for taking the time to test and report, we appreciate it! Tom
Corona Renderer developers, that’s cool!! Thanks for the Corona for the Archicad!
great
Great news for Archocad users. Thank you
Great Job!! I Think it*ll be Very useful thing! I hope for MacOS Release in a Nearest Future! I found some bugs (AC22, W10, r.A-3) when use with surface painter. Can*t report on the forum (Can*t fill reg form)
Hi! What is the problem with filling in the registration form for the forum? Would be great to have this report over there (as developers unfortunately can’t track reports on the blog). Let me know, and I am sure we can get you signed up!
please guys 360 spherical render =]
For all feature requests, please post over on the forums – developers don’t monitor the blog posts, sorry. Head here to make the request! https://corona-renderer.com/forum/index.php?board=45.0
Thanks!
in alpha 3 not working mappers and HDRI map
For all bug reports, please post over on the forums at https://corona-renderer.com/forum/index.php?board=47 – support and developers don’t directly monitor comments to the blog posts, sorry. Thanks for your understanding!
Wonderful images! Is it possible to find a tutorial to understand how you can insert snow and light on trees or objects on stage to give the same effect as in this work?
Hi !
i want to know if corona has a plugin for mac ?
Not at the moment, sorry (for Corona Renderer for ARCHICAD – there is Corona Renderer for Cinema 4D on the Mac, though).
Hi there, I am really exited for this tool on archicad, but I think that you should add an option to render with the GPU to do faster than
There are no plans to create a GPU version of Corona (and GPU is not always faster anyway 😉 See https://corona-renderer.com/features/the-cpu-advantage and https://corona-renderer.com/features/proudly-cpu-based). Thanks!
you are really talented, making use of the technology around really helps a lot!
This is awesome, thank you!
Hola chicos, muchas gracias, acabe de publicar en mi pagina adjunta un portafolio de un proyecto todo renderizado con este plugin para archicad.
https://www.facebook.com/Arquitectoluisfenriquez/media_set?set=a.10157235630474391&type=3
con CORONA ARCHICAD
Thank you much for this !
I use, great for Archicad. In my opinion… to small material preview, to see material details – much to small
Where do I put a normal map in the texture editor? I can only find a bump channel.
Thank you for the opportunity to explore this software!
/Karl
Hi! Please post over on the forums, where developers and support will see your question (they don’t monitor the blog conversations 🙂 ) – https://corona-renderer.com/forum/index.php?board=43.0 – thanks! Tom
Hello,
I installed corona alpha 3 in archicad 21
But i need a code to activate corona. Where can I find these?
Please contact support@corona-renderer.com (or alternatively over on the ARCHICAD section of our forums at https://corona-renderer.com/forum/index.php?board=43) for all help with licensing, activation, etc. Thanks! Tom
Please how do I install corona image editor in achicad 20
I don’t believe the CIE is included in the archicad installer (since it was a very early development version), sorry.
Loving it already after 15 minutes of using it! good job!
For Revit planned?
No plans for Revit at the moment, sorry. You can vote in our always-open poll at https://corona-renderer.com/forum/index.php?topic=238.
Thanks!
Tom
Wainting for new versions! Already worked too many projects w/ corona for archidad, so happy. Congratulations and thank you!
Glad you are enjoying it! Keep an eye on https://corona-renderer.com/forum/index.php?board=44.0 for new versions and the latest updates 🙂 Thanks! Tom
Hello guys, such a good tool ! Thak you for your job! It will be super if you put section for reflection map in material editor.
Hi! Glad you like it 🙂 Best thing to do for feature requests and feedback is post over on the forum, as the development team can’t monitor comments on the blog – head over to https://corona-renderer.com/forum/index.php?board=45.0 and post there. Also, would be a good idea to be a bit more specific on what you are looking for – mapping the reflection color? The reflection glossiness? Overriding the environment seen in reflections? And so on 🙂 Thanks! Tom
I am very happy that the final version will be released
Unfortunately, development on Corona Renderer for ARCHICAD has been suspended, see here for full details – https://corona-renderer.com/forum/index.php?topic=28493
do you have a corona plugin for archicad version19-22? please send me a link thank you
Hi, sorry, the Corona for ARCHICAD plugin was discontinued in March 2020 so there is no version available for download (see https://forum.corona-renderer.com/index.php?topic=28493 )